Coaster Storage & Fit

Marble Coaster Holder Small

Classic white marble coaster holder in ivory white with light grey veins, recessed center and soft honed finish.

A White Marble Coaster Holder keeps a four- or six-piece set stacked neatly and protects edges from loose storage; for common 4-inch coasters, the internal cavity should provide slight clearance rather than a tight friction fit. Holders may be supplied with coasters or sold independently. If metal or brass details contact stone, smooth protective interfaces help avoid scratches, while a Round Marble Coaster Holder should be cleaned with neutral stone-safe products.

Dedicated Coaster StorageEasy One-Hand RemovalWeighted Stable BaseProtective Interior LiningMatching Marble Finish

Price AED 119

~~AED 132~~ InStock

SKU: RP-26-P7690
Material: Carrara White Marble
Material type: Classic White Marble
Finish: Soft Honed Finish
Color: Ivory White with Light Grey Veins
Size: Small
Lead time: 355 - 5 Days
Minimum order: 1

Product profile

Material

Carrara White Marble

Material type

Classic White Marble

Finish

Soft Honed Finish

Request quote Back to products

Product typeTabletop Storage Accessory

MaterialCarrara White Marble

FinishSoft Honed Finish

Dimensions12 cm × 12 cm × 6 cm

Lead time355 - 5 Days

Holder Material & Corrosion Control

Choosing the Right Holder Material

For 10 cm-class coasters, a 12 × 12 × 6 cm holder provides enough clearance for easy removal while leaving room for protective contact points around the stone edges. A marble holder avoids corrosion entirely, whereas brass or steel alternatives should use finishes suitable for moisture and frequent handling. Regardless of material, the holder should separate the coasters from hard edges and include feet or padding underneath to protect the tabletop.

Honed Carrara marble coaster holder with full stack and one coaster partly lifted — Honed Carrara marble holder keeps a full coaster stack secure while allowing easy removal of each piece.

Fit the Full Stack

Sizing a Carrara Marble Coaster Holder for 4-Inch Coasters

A 4-inch coaster is about 10.2 cm across, so the holder’s internal cavity needs slightly more than that dimension to allow easy insertion and removal without edge binding. Capacity then depends largely on coaster thickness: four 10 mm stone coasters need about 40 mm of stack height before clearance, six need about 60 mm, and larger sets require proportionally more depth, so the usable internal height—not the 12 × 12 cm outer size alone—determines how many pieces fit.

Protective Storage

How a Stone Coaster Stand Should Hold Marble Pieces

A stone coaster stand should keep marble pieces stacked vertically or horizontally without allowing their edges to knock together every time one is removed. Slight internal clearance prevents friction at the perimeter, while a smooth or padded base reduces hard stone-on-stone contact under the lowest coaster. The holder should contain the full stack securely but still leave enough exposed edge for easy lifting.

Cavity Size

Internal Clearance in a Marble Coaster Caddy

Leave slight clearance around the coaster stack so pieces lift freely rather than scraping against an overly tight stone cavity.

Material Choice

Stone vs Metal Coaster Storage Stand

Any metal detail should resist corrosion and meet the marble through smooth or cushioned interfaces that prevent scratches at contact points.

Furniture Contact

Anti-Scratch Base for a Carrara Coaster Holder

Felt or rubber feet beneath the Carrara holder reduce sliding and isolate the 1 kg stone base from timber, glass or polished furniture.

Product at a Glance

Carrara Coaster Holder Product Details

This coaster holder is made from Classic White Marble in ivory white with light grey veins and finished in a Soft Honed surface. It measures 12 × 12 × 6 cm and weighs 1.00 kg, providing a substantial Carrara storage cradle for a compact stack of coordinated drink coasters.

Internal Cavity Width	Approx. 105 mm internal cavity width for Ø102 mm coasters with retrieval clearance.
Internal Cavity Depth	Approx. 42 mm usable internal cavity depth for a four-piece Ø102 mm coaster stack.
Usable Stack Height	Approx. 40 mm usable stack height, accommodating four 10 mm coasters or six thinner 6 mm coasters with retrieval clearance.
Coaster Clearance	Approx. 1.5 mm clearance per side between each Ø102 mm coaster and the 105 mm internal cavity, allowing easy removal without excessive lateral movement.
Base Thickness	Approx. 12 mm solid marble base thickness beneath the 42 mm-deep cavity, supporting the stacked coasters within the 60 mm overall holder height.
Wall Thickness	Approx. 7.5 mm uniform wall thickness around the 105 mm internal cavity within the 120 mm exterior body.
Edge Radius	R6 mm external corner radius with R3 mm eased upper edges around the cavity, reducing chipping risk while preserving the 105 mm internal coaster clearance.
Underside Protection	Full 1.5 mm cork-rubber backing beneath the 120 × 120 mm base, reducing sliding and preventing the 1 kg marble holder from scratching tables.
Anti-Slip Feet	Four 2 mm transparent silicone feet positioned near the corners, providing grip and preventing scratches beneath the 120 × 120 mm holder.
Holder Opening Geometry	Square 105 × 105 mm internal opening with approximately R6 mm internal corners, accommodating either Ø102 mm round coasters or square coasters with lightly rounded corners.

Set Organization

Keeping Marble Drink Coasters Protected Between Uses

Stack only clean, completely dry coasters inside the holder, keeping cork or felt faces between stone surfaces where possible to prevent edge abrasion. Lower each coaster into the cavity instead of dropping it, and do not overfill the holder beyond its intended stack height. Place the 1 kg holder on a clean, protected tabletop away from edges where it could be knocked down.

Clean Storage on Display

Why Choose a Stone Coaster Stand

A stone coaster stand keeps four or six coasters grouped in one place, reduces loose pieces moving around the table, and protects coaster edges from repeated knocks during storage. Slight internal clearance also makes the stack easier to remove without forcing the stone pieces against the holder.

Four-to-Six Capacity
The holder accommodates a four-to-six-piece coaster stack while allowing enough clearance for easy removal.
Protected Stone Edges
The fitted holder keeps coaster edges protected from loose contact and repeated knocks during storage.
Weighted Table Stability
The 1 kg marble body keeps the coaster holder firmly positioned while individual coasters are removed and returned.
Coordinated Marble Finish
The honed Carrara holder can coordinate with matching white-marble coasters for a consistent natural-stone tabletop set.

Gift Pairing

Building a Marble Coaster Gift Set

Build a marble coaster gift set by matching the Carrara holder with four or six coasters in the same or deliberately contrasting stone, keeping dimensions consistent so the stack sits securely without edge friction. Add fitted presentation packaging to protect the polished pieces during gifting or transport, with finish care approached as carefully as specialist granite polishing vancouver.

Carrara marble coaster gift set with matching holder, four or six coasters and fitted packaging — Carrara coaster gift set with matching holder, four- or six-piece coaster options and fitted presentation box.

Technical Overview

Marble Coaster Holder Specifications

Use the holder specifications to verify capacity and compatible coaster size before pairing it with an existing set. The underside field is also important for confirming how the Carrara holder contacts your tabletop while keeping the stored coasters protected and easy to remove.

Product details

Specifications, care, delivery and FAQ

Everything is rendered from product JSON fields so the page remains SEO-ready even before JavaScript runs.

SpecificationsProduct size, material, finish and commercial details.

BrandRoar Panther

SKURP-26-P7690

MaterialCarrara White Marble

Material typeClassic White Marble

FinishSoft Honed Finish

ColorIvory White with Light Grey Veins

SizeSmall

Dimensions12 cm × 12 cm × 6 cm

Weight1.00 kg

AvailabilityInStock

Lead time355 - 5 Days

Minimum order quantity1

Product GroupMarble Coaster Holder

VariantMarble Coaster Holder Small

SkuRP-26-P7690

Material TypeClassic White Marble

Lead Time355 - 5 Days

Minimum Order Qty1

Best Usestoring stone coasters in an upright stack, keeping a coaster set beside serving areas, reducing edge-to-edge knocks with padded inserts, organizing coasters on dining and coffee tables, presenting coordinated Carrara drink accessories

Care guideCleaning and handling notes for this stone product.

Shipping and order notesLead time, delivery and custom order information.

FAQCommon questions about this product.

How much internal clearance should this Carrara marble holder provide around 10 cm coasters so they can be lifted out easily without rubbing or chipping their edges?

For 10 cm coasters, an internal width or diameter of about 10.4–10.6 cm gives roughly 2–3 mm clearance per side, allowing easy removal without excessive rattling. Increase clearance slightly for irregular hand-finished edges, add a finger cutout or open side for lifting and line contact points with a thin non-staining protective material.

Do holders for four-piece and six-piece marble coaster sets require different depths?

Yes, holder depth should be matched to coaster quantity and thickness. Four 10 mm coasters require at least about 42–44 mm of usable stack space including clearance, while six require approximately 62–64 mm; the internal width should also allow easy removal without permitting the coasters to lean and chip.

Which underside protection—cork, felt or silicone—best prevents the 1 kg Carrara Coaster Holder from sliding or scratching polished wood and glass furniture?

Non-marking silicone offers the best slip resistance for a 1 kg holder on glass, while a recessed cork base gives broad cushioning and reliable protection on polished wood. Dense felt is soft but may slide more readily; whichever material is chosen should be acid-free, non-staining, slightly inset from the stone edge and regularly cleaned of grit.

How can I confirm whether my existing marble coasters will fit a separately purchased holder?

Measure the coaster’s maximum width or diameter, thickness and total stacked height, including cork or rubber backing and natural edge variation. The holder’s internal cavity should provide roughly 2–4 mm of lateral clearance beyond the widest coaster and several millimetres above the full stack so pieces lift out without rubbing; this 12 × 12 × 6 cm holder will not necessarily have 12 cm of usable internal space because wall thickness reduces the opening. Request the exact internal measurements from the seller and compare them with your actual stacked coasters before purchasing.

What internal padding or separators will prevent the edges of stone coasters from knocking together and chipping inside the Marble Coaster Holder?

Line the internal base and contact walls with thin colorfast felt, microsuede or non-staining silicone, and add soft dividers if coasters stand individually. Padding should remain removable for cleaning, provide enough clearance for easy retrieval and contain no hard seams or exposed adhesive that could strike the stone edges.

Reviews

Reviews and new review submission

0.0 average rating from 0 reviews. New reviews are saved as pending until approved.

No approved reviews yet for this product. The review form is ready for buyer submissions.