A door holder benefits directly from stone's density, but the required weight depends on door mass, floor slope, hinge resistance and airflow rather than one universal number. A broad, low base is preferable for heavy doors, and felt, rubber or cork underneath prevents the stone from scratching hard flooring. Compact sculptural doorstops can also function as bookends when their geometry provides enough lateral support.
Doorstop Weight & Floor Safety
Marble Door Holder Small
Secure product inquiry
Buy now
Cash on delivery available. Product details are pre-filled below. Owner delivery adds AED 5,000.
Sculptural Weighted Doorstop
Floor Protection Beneath a Weighted Stop
Despite the solid-stone construction, this particular piece weighs only 0.17 kg, so it is better suited to light interior doors than to the heavy-duty doorstops often marketed on the strength of substantial marble weight. Its wedge geometry and non-slip or felt underside are therefore critical to performance and floor protection.
Buyer Fit
Choosing the Right Marble Door Stop
The effectiveness of a Nero Marquina door stop depends on the door itself rather than stone weight alone. A heavier door, stiff hinges or a sloping floor creates greater resistance than a lightweight interior door, while strong airflow can push or pull the door against the stop with additional force. Flooring also matters: smooth polished tile may allow a light doorstop to slide more easily than textured surfaces, so rubber, felt or cork beneath the stone can improve grip and protect the floor. This compact 0.17 kg piece is therefore more appropriate for lighter doors and controlled indoor conditions than for heavy doors exposed to strong drafts.
Format Options
Marble Door Stopper Formats for Daily Use
Wedge-shaped stops slide beneath the door and rely on friction, while solid block and house-shaped versions use stone weight against the lower edge. Handled doorstops are easier to reposition and suit heavier pieces, but every format should include floor-protective backing where direct stone contact could mark timber or polished surfaces.
Marble Door Weight Size and Compatibility
At only 2.5 × 3 × 9 cm and 0.17 kg, this compact stop is better suited to lighter interior doors unless floor friction significantly assists holding force.
Natural Stone Doorstop Stability and Support
At only 0.17 kg, effectiveness depends heavily on wedge geometry and high-friction floor contact rather than mass alone, so suitability must match the door.
Black Marble Door Stop Finish and Material Behaviour
The Brosso Vecchio leathered Nero Marquina gives tactile grip and hides minor scuffs, while felt or rubber beneath the base prevents scratching hard floors.
Product Data
Beige Marble Door Holder Product Details
This small door holder is made from Nero Marquina Marble in a Dense Black Limestone composition, showing Deep Black stone with contrasting white veining under a Brosso Vecchio Leathered Finish. At 2.5 cm × 3 cm × 9 cm and 0.17 kg, it is an intentionally compact stone accessory suited to light-duty door-stop or decorative bookend applications.
| Wedge Angle | 12° |
|---|---|
| Door-Gap Range | Approximately 6–25 mm floor-to-door gap range. |
| Floor Grip Material | Non-marking 3 mm black silicone floor-grip pad |
| Contact Pad Material | 3 mm non-marking silicone contact pad protecting the door surface |
| Door Contact Height | 30 mm door-contact height above floor level |
| Maximum Door Load | Suitable for holding a manually operated interior door weighing up to 40 kg on a level floor |
| Floor Compatibility | Suitable for dry tile, marble, granite, timber and vinyl floors; less effective on thick carpet or uneven surfaces |
| Anti-Slip Rating | High-grip silicone underside with an approximate dry static friction coefficient of ≥0.7 on smooth tile |
| Edge Protection | 2 mm soft silicone bumper protecting the door-contact edge |
| Carry Grip Option | Optional 20 × 60 mm recessed finger grip on the upper face for easier carrying |
Made to Order
Custom Marble House Doorstop Options
A custom marble house doorstop can be made broader and heavier for high hinge resistance, sloping floors or areas affected by airflow, rather than relying on the compact 0.17 kg format. Integrated rope, leather or metal handles simplify repositioning, silicone or rubber backing improves floor grip, and sculptural wedge, arch or block forms can be developed to complement the interior.
Key Benefits
Why Choose This Marble Doorstop With Handle
This marble doorstop offers a compact way to hold a door without introducing bulky hardware into the room. A shaped handle improves grip when repositioning it, while the dense natural stone gives the piece a tactile, decorative character that can coordinate with other black stone interior details.
- Small Space Format
The slim Nero Marquina form holds a door in place without creating a bulky obstruction across the floor area.
- 0.17 kg Weighted Build
The 0.17 kg Nero Marquina form provides light-duty holding weight for suitable doors while maintaining a very compact footprint.
- Brosso Vecchio Leathered Surface
The Brosso Vecchio leathered surface gives Nero Marquina a tactile, low-glare finish that disguises minor handling marks on a frequently moved doorstop.
- Custom Fabrication Options
Weight, base geometry and protective underside can be fabricated around the door mass, floor type and required holding resistance.
Purchase Guidance
Before Ordering a Marble Bookend Doorstop
Before ordering a Nero Marquina doorstop, confirm the door weight, hinge resistance, floor slope and available clearance because a light decorative stop may not restrain a heavier or wind-loaded door. If the same piece is also expected to work as a bookend, its side profile and contact area should be designed for both functions, with dimensional planning similar to specifying a counter top wash basin cad block before fabrication.

Specification Reference
Marble Door Holder Technical Specifications
Check the technical table for the compact 2.5 × 3 × 9 cm wedge dimensions and 0.17 kg weight together with felt, rubber or cork backing and the intended door weight, bottom clearance, floor slope and hinge resistance for which the holder is suitable.
Product details
Specifications, care, delivery and FAQ
Everything is rendered from product JSON fields so the page remains SEO-ready even before JavaScript runs.
Cleaning: Brush away floor grit before wiping, clean the leathered Nero Marquina with a soft damp cloth and pH-neutral stone cleaner, dry the stone and inspect the felt rubber or cork backing for embedded debris, replace dirty or hardened pads, avoid acidic cleaners abrasives soaking and dragging the holder across the floor
Daily Care: Fit non-marking rubber or felt beneath the stone, place it where it cannot become a trip hazard, avoid using it on doors heavier than its holding capacity, wipe floor grit away, keep it dry, inspect edges for chips
- Using the 0.17 kg holder for a heavy self-closing door
- placing it where it becomes a trip hazard
- using it on flooring without protective backing
- exposing it to repeated door impacts
- assuming it can restrain books without testing
Maintenance: Add non-marking rubber beneath it, match holding weight to the door and airflow, keep it outside walking paths, wipe floor grit away, inspect chipped edges, use a larger low-profile design for heavier doors
Handling: Position the lightweight wedge using its stone body rather than kicking it, keep fingers clear of the door gap, fit non-slip rubber beneath it, match its wedge angle to the floor slope, test the door gently before release, do not rely on the 0.17 kg holder for heavy self-closing doors
What minimum doorstop weight is needed to hold a heavy interior door open when hinge tension, airflow and floor slope are taken into account?
Doorstop weight cannot be selected from door mass alone, but a typical interior door on a level hard floor often needs roughly 1–2 kg when a high-grip base is used, while heavy, self-closing or draft-exposed doors may require 3–5 kg or mechanical hold-open hardware; this 0.17 kg compact piece is suitable only for a light, low-tension door under calm conditions and should not be assumed adequate for a heavy villa door.
What wedge angle is needed for this marble door holder to work with different gaps between the door and floor?
A wedge angle of approximately 10–15 degrees suits common door-to-floor gaps of about 5–20 mm, while larger clearances may require a steeper or taller wedge. Since this holder is only 2.5–3 cm high and weighs 0.17 kg, its grip should be verified on the intended flooring before relying on it.
Is rubber or cork backing better for helping this lightweight marble door holder grip polished floors without leaving scratches or marks?
Rubber or silicone backing provides better grip than cork on polished floors and resists moisture without crumbling. Cork cushions well but can slide on very smooth tile and wear at the thin edge. Because this Nero Marquina holder weighs only 0.17 kg, use high-friction non-marking rubber or silicone across most of its underside and design a shallow wedge angle. Test it against the actual door-closing force; the lightweight stone may be insufficient for heavy or self-closing doors.
Can this lightweight marble doorstop grip securely on a sloped floor, or will it slide unless its wedge angle, weight and non-slip backing are customized?
At only 0.17 kg with a 2.5 × 3 cm section, this doorstop is unlikely to grip a sloped floor reliably without customization. It needs a wedge angle matched to the door gap, a broad high-friction non-marking silicone or rubber underside and possibly additional weight; otherwise door force, airflow or gravity may cause it to slide downhill.
Can this 0.17 kg Nero Marquina door holder also function as a bookend, or is its narrow 2.5 × 3 cm footprint too light to restrain upright books securely?
At only 0.17 kg with a 2.5 × 3 cm footprint, this door holder is too light and narrow to restrain more than a few lightweight upright books reliably. It can function decoratively beside one or two slim books, but a practical bookend needs a broader base, greater mass and a vertical support face that resists lateral pressure.
Reviews
Reviews and new review submission
0.0 average rating from 0 reviews. New reviews are saved as pending until approved.
No approved reviews yet for this product. The review form is ready for buyer submissions.