Lightweight Stone Surfacing

Marble Sheet Small

Calacatta Oro thin marble sheet in ivory white with warm golden veining and satin-polished finish.

A marble sheet can refer to thin natural-stone veneer rather than a conventional full-thickness slab; flexible versions are commonly only a few millimetres thick and can follow gently curved surfaces. These lightweight sheets are used on walls, bathroom features, columns and furniture and are bonded to prepared substrates such as cement board, wood or metal using compatible adhesive. They can bend within their specified radius but should not be treated like fabric or sharply folded.

Calacatta Oro VeneerUltra-Thin 3 mm ProfileSatin-Polished FinishCurved-Surface CompatibleLightweight Wall Application

Price AED 1,175

~~AED 1,305~~ InStock

SKU: RP-26-P7366
Material: Calacatta Oro
Material type: Veined Calcitic Marble
Finish: Satin-Polished Finish
Color: Ivory White with Warm Golden Veins
Size: Small
Lead time: 31 - 5 Days
Minimum order: 1

Product profile

Material

Calacatta Oro

Material type

Veined Calcitic Marble

Finish

Satin-Polished Finish

Request quote Back to products

Product typeHardware > Building Materials > Wall Paneling > Stone Veneer Sheets

MaterialCalacatta Oro

FinishSatin-Polished Finish

Dimensions120 cm × 60 cm × 0.3 cm

Lead time31 - 5 Days

Flexible Veneer for Curved Surfaces

Bring Natural Stone onto Lightweight Curved Surfaces

Thin stone veneer is useful where a conventional slab would be unnecessarily heavy, particularly on columns, curved walls, lift interiors and furniture. Backed flexible formats can follow gentle radii and be bonded to timber, metal, glass or cement-board substrates, allowing natural-stone character with substantially lower structural load.

Satin-polished Calacatta Oro thin marble sheet with ivory-white stone and warm golden veining — Thin Calacatta Oro sheet shows satin-polished stone face, visible 3 mm edge and gentle substrate curve.

Natural Material

Calacatta Oro Thin Stone Sheet Material and Finish

Calacatta Oro thin stone sheet uses veined calcitic marble with an ivory-white background and warm golden veins that preserve the recognizable character of the stone even in a reduced-thickness format. The Satin-Polished Finish gives the surface a controlled sheen that brightens the ivory base and defines the golden movement without creating the highly reflective appearance of a full gloss polish. Vein width, direction and colour concentration vary naturally through the marble, so individual sheets can show anything from fine gold lines to broader mineral movement. This natural variation remains visually important even when the stone is fabricated as a lightweight thin sheet.

Form & Application

Natural Stone Veneer Sheet Size and Use

The 120 × 60 × 0.3 cm sheet covers a useful wall or furniture area while weighing only 5.8 kg, making it far lighter than a conventional slab. Its thin profile is suited to wall panels, columns, bathroom features and furniture facing where a stable substrate carries the sheet and the stone is treated as bonded veneer rather than a freestanding structural panel.

Thickness

Ultra-Thin Stone Veneer Formats

At only 3 mm thick, the 120 × 60 cm marble sheet works as lightweight veneer capable of following gentle curves when fully bonded to a suitable substrate.

Flexibility

Curved Wall and Column Applications

At 3 mm thick, the sheet can follow gentle curves when fully bonded but should never be sharply folded like fabric.

Backing

Stone Sheet Backing and Adhesive

Bond the 3 mm marble veneer continuously to a compatible rigid or gently curved backing so the thin stone is supported across its full area.

Detailed Breakdown

Flexible Stone Sheet Product Details

This Calacatta Oro veined-calcitic-marble sheet measures 120 × 60 × 0.3 cm, weighs 5.8 kg and uses a satin-polished ivory-white finish with warm golden veins. The 3 mm natural-stone veneer can follow gentle curves within its engineered bend radius, but backing type and minimum bend radius are not specified; installation requires full bonding to a compatible prepared substrate.

Backing Material	Fiberglass-reinforced polyester-resin backing
Minimum Bend Radius	Minimum 150 mm bend radius for the 3 mm fiberglass-backed flexible marble sheet.
Adhesive Compatibility	Compatible with high-performance white flexible stone adhesive or neutral-cure MS-polymer adhesive; avoid dark, solvent-based or acidic products that may stain the 3 mm sheet.
Sheet Flexural Direction	Designed to flex primarily along the 120 cm length, with the backing fibres oriented to control transverse cracking; do not reverse-bend across the 60 cm width.
Joint Treatment	2 mm nominal joint between sheets, filled with colour-matched flexible stone resin or neutral-cure sealant after aligning the surface and veining.
Cutting Method	Cut from the face using a water-cooled diamond blade or CNC stone cutter on a fully supported sacrificial board; small openings may be finished with diamond tooling.
Edge Sealing	Seal all cut edges and penetrations with clear penetrating stone sealer before installation, then finish exposed joints with neutral-cure, non-staining sealant.
Substrate Primer	Apply a stone-sheet manufacturer-approved acrylic or epoxy bonding primer suited to the actual substrate; non-porous metal or glass requires a dedicated adhesion promoter.
Thermal Expansion Allowance	Maintain a 3 mm perimeter allowance and 2 mm sheet joints indoors; larger or sun-exposed installations require flexible joints coordinated with the substrate and adhesive system.
Roll/Flat Packaging	Pack flat between rigid boards for the 120 × 60 cm format; rolling is not recommended unless the manufacturer confirms the backing’s minimum safe bend radius.

Everyday Care

Thin Natural Stone Surface Care

Install the thin Slate Lite sheet only with the adhesive and substrate primer approved for its backing, following the permitted bend direction and minimum curvature rather than forcing a sharp fold. Wet-area use requires a waterproof substrate, sealed penetrations and compatible joint treatment because the veneer alone is not waterproofing. Clean the surface gently with pH-neutral products and avoid abrasive pads that could damage the brushed stone face.

Practical Benefits

Why Choose a Thin Marble Veneer

A thin marble veneer gives buyers access to genuine natural-stone appearance where the weight and thickness of a conventional slab would be impractical. It is especially useful for furniture, columns, curved features and renovation work where reducing structural load and build-up thickness matters.

Ultra Thin Surface
The 3 mm Calacatta Oro veneer provides genuine stone character with minimal build-up for walls, furniture and gently curved surfaces.
Lightweight Wall Application
The 3 mm Calacatta Oro veneer provides genuine natural-stone appearance with far less wall load than a conventional full-thickness slab.
Curved Surface Potential
The 3 mm Calacatta Oro veneer can follow suitable gentle curves, allowing natural stone finishes on columns, rounded furniture and other non-flat surfaces.
Large Sheet Coverage
The 120 × 60 cm Calacatta Oro veneer covers a broad wall, furniture or column area with fewer joints than smaller stone pieces.

Customization

Custom Stone Sheet Options

Calacatta Oro stone sheets can be ordered to project-specific sheet dimensions with satin, polished or other compatible finishes and backing systems selected according to the substrate and required flexibility. Thin veneer can be fabricated for gently curved columns, walls, bathroom features or furniture panels, with adhesive, joint layout and installation planned around the application rather than treated like a conventional slab; the same dimensional discipline applies when working with standard worktop sizes.

Custom Calacatta Oro stone sheets for flat walls, curved columns and furniture panels with backing options — Calacatta Oro stone sheet applications for flat walls, curved columns and furniture panels with backing options

Technical Data

Stone Veneer Technical Specifications

The veneer specification table confirms Calacatta Oro veined calcitic marble, satin-polished finish, ivory-white colouring with warm golden veins, 120 × 60 × 0.3 cm sheet size and 5.8 kg weight alongside backing type, total installed thickness, minimum bending radius, compatible adhesive, substrate requirement and cutting or jointing method.

Product details

Specifications, care, delivery and FAQ

Everything is rendered from product JSON fields so the page remains SEO-ready even before JavaScript runs.

SpecificationsProduct size, material, finish and commercial details.

BrandRoar Panther

SKURP-26-P7366

MaterialCalacatta Oro

Material typeVeined Calcitic Marble

FinishSatin-Polished Finish

ColorIvory White with Warm Golden Veins

SizeSmall

Dimensions120 cm × 60 cm × 0.3 cm

Weight5.8 kg

AvailabilityInStock

Lead time31 - 5 Days

Minimum order quantity1

Product GroupMarble Sheet

VariantMarble Sheet Small

SkuRP-26-P7366

Material TypeVeined Calcitic Marble

Lead Time31 - 5 Days

Minimum Order Qty1

Best UseLightweight feature-wall covering, curved column facing, bathroom accent walls, furniture panel surfacing, reception-counter facing, decorative ceiling or niche details

Care guideCleaning and handling notes for this stone product.

Shipping and order notesLead time, delivery and custom order information.

FAQCommon questions about this product.

What minimum bending radius can a 3 mm flexible marble veneer safely follow before there is a risk of cracking or delamination?

There is no universal minimum bending radius for a 3 mm stone veneer because flexibility depends on the backing material, resin, stone type, vein direction, panel size, temperature and manufacturer. Some reinforced veneers can follow broad curves, but forcing an unverified Calacatta Oro sheet around a tight radius risks face cracking or backing delamination. Obtain the supplier’s tested radius, bend the sheet only in the approved direction and make a full-size sample on the actual substrate. Use segmented panels or factory-formed components if the required curve is tighter than the tested limit.

Which adhesive system should be used to install this 3 mm Calacatta Oro marble sheet on plywood, metal or cement board without staining, delamination or visible substrate movement?

Use a white, non-staining adhesive specifically approved for thin natural-stone veneer and the particular substrate. Cement board normally accepts a compatible white flexible stone adhesive; plywood may need an uncoupling or approved primer system; metal generally requires abrasion, degreasing and a manufacturer-approved reactive resin adhesive. A single adhesive is not automatically suitable for all three. Test for staining and bond compatibility, provide complete contact without voids and account for substrate movement because a 3 mm marble sheet cannot bridge flexing joints safely.

Can this 3 mm Calacatta Oro stone veneer wrap round columns or curved walls, and what minimum bend radius and backing system must be confirmed before installation?

Some reinforced 3 mm stone veneers can follow broad curves, but flexibility depends on backing, resin, panel size and vein direction. Obtain the manufacturer’s tested minimum bend radius for the exact Calacatta Oro product and make a full-size mock-up. Do not force one sheet around a tight column. Use narrower vertical strips, controlled joints or factory-formed curved components where the required radius exceeds the veneer’s tested capability.

How should joints, external corners and internal corners be finished when installing this 3 mm Calacatta Oro veneer so seams remain neat without cracking or delamination?

Use narrow, consistent joints over a stable prepared substrate and fill them only with the veneer manufacturer’s compatible flexible material. External corners should use factory mitres, overlapping returns or solid-stone/metal trim rather than sharply bending the sheet; internal corners need a controlled gap and flexible sealant to accommodate movement. Never bridge substrate joints. Dry-lay vein alignment, maintain full adhesive contact and avoid rigid grout at moving corners, where cracking or edge delamination is most likely.

Can this 3 mm Calacatta Oro marble sheet be installed in a bathroom or wet area, and what waterproof substrate, adhesive, sealed joints and edge protection are required?

The 3 mm veneer can be used in a bathroom as decorative facing, but it is not waterproofing and should not be assumed suitable for continuous immersion or a shower floor. Bond it fully to a rigid, dimensionally stable waterproof substrate with a manufacturer-approved non-staining adhesive, maintain movement joints, seal penetrations and seams with compatible flexible detailing, and protect exposed corners with wrapped returns or purpose-made profiles.

Reviews

Reviews and new review submission

0.0 average rating from 0 reviews. New reviews are saved as pending until approved.

No approved reviews yet for this product. The review form is ready for buyer submissions.